You are here: PRODUCTS > EXTRA LICENCES > SYNCHRONIZER > Sychronizer_Introduction



Multicam SYNCHRONIZER allows to synchronize from a reference machine, to replicate the configuration, the realization, and the backup of 2 or more Multicam machines. For example " start or stop a recording, change the video source or the composition of a scene, ... ".

The interest of using SYNCHRONIZER :

Master/Backup: two identical machines will have the same replicated configuration. So in case of failure of the Master, the Backup machine can take over.

Master/Slave: two systems can share the load in order to take advantage of all the features offered but without risks because the performance will be shared. This is also interesting to create a clean recording (without skinning) and a drity (with graphic skinning) at the same time.