Like all SPIRIT robots, SLIDE can communicate its position in space in real time via the FreeD protocol.
With the multiCAM TRACKER software, the positions of the various connected devices are aggregated to communicate the coordinates of a global virtual camera under a single FreeD signal.
SPIRIT SLIDE is self-tracking, meaning that no external optical tracking system is required to provide real-time position information. A strip along the rails allows the carriage itself to know its position.
All SPIRIT robotic systems offer a web service to configure the device:
– adjustment of speed and ramping thresholds,
– direction of travel
The interface is ergnomic and allows to perform simple operations like :
– control with virtual joystick
– save position
– position recall at a given speed
– programming of movements (A/B) and loops
INTUITIVE CONTROL WITH MUTLICAM PILOT
PILOT is a complete robotics control interface that allows a single operator to take control of the entire device.
INTUITIVE AND PRECISE CONTROL
We have designed control surfaces that provide operators with precision control and unmatched ergonomics. With an IP connection, the multiCAM CONTROL PANEL can control the trolley as well as the column, head, zoom and optical focus.
With the multiCAM PILOT solution, you benefit from an ergonomic and intuitive interface allowing you to control up to 6 robots and cameras simultaneously.
By using it, you will be able to pre-program and create incredibly precise motion sequences.
|Encoder||Incremental / Track Encoded|
|Max Velocity||0.85 m/s (Soft limited) Max theoretical 4 m/s|
|Optical Axis Height||320mm (M) / 420mm (L)|
|Remote control||IP with Web interface, SPIRIT Joystick, multiCAM Suite, UDP (SPIRIT protocol)|
|Genlock IN||Black Burst / Tri-Level|
|Genlock OUT||SDI Loop|
|Network||2x RJ45 (Slide, Head)|
|Compatibility||SPIRIT Head, PTZ, bumper|
|Tracking||Free-D (auto-tracking encoder) via RJ45|
|Power IN||24Vdc 8A|
|Dimensions||410mm x 300mm x 200 mm|
|embase XLR 3 PTS male||24 volts IN (alim OVNI)|
|embase XLR 3 PTS femelle||24 volts OUT|
|embase XLR 4 pts||12 volts OUT ( alim PTZ OU CAM )|
|embase RJ 45||Qté :2|